Nokia 6560 - . The battery

10

Copyright © 2003 Nokia

Charging

Follow these guidelines to optimize battery
performance.

1

With your phone turned off, connect the
charger plug to the bottom of the phone.
Connect the charger to an ac wall outlet.

The battery indicator bar appears on the
right-hand side of the screen and starts
to scroll from bottom to top. It will
remain constant when the phone is
fully charged.

2

Disconnect the charger from the
phone and ac outlet when the
battery is fully charged.

After the indicator bar stops scrolling,
you can leave the charger connected and the battery will accept a “trickle
charge” to maintain a fully charged battery. See “Reference Information” on
page 99 for more information on batteries.

Note: Charge the new battery for three hours before using. Use the battery
until it is fully discharged. You should do this for a total of three charging
cycles. After the first charge, you can make and receive calls during the
charging cycle, but the calls interrupt the charge. When a call ends, the
charge will resume. The charging time depends on the charger you use.

Removing

Before removing the battery, make sure the phone has been turned off for at least
10 seconds.

1

Place your index finger in the grove
at the top of the battery, and lift
out of phone.

2

Take out the battery.

To learn how to remove and replace
the covers, see Xpress-on covers
on page 11.

Warning: Use only your hands
to remove the battery. Do not
puncture, burn, or use any
objects that may damage the phone or the battery. Please recycle the
battery or dispose of properly according to local regulations.